Key with key fob in hand

How to Program a Ford Key Fob

Many new Ford vehicles come with a remote key fob for easier vehicle access. If you recently had to replace your key fob, you may have questions about how to program a Ford key fob. Fortunately, Ford key fob programming is actually quite simple. We share how to complete the process below so that you can take advantage of the keyless entry feature in Lafayette. We’re delighted to share our service tips with you! 

 

 

Ford Key Fob Programming Instructions 

  1. Close the car doors and open the driver-side door. Press the UNLOCK button on the driver-side door. 
  2. Turn the ignition from OFF to RUN 8 times. This step will need to be completed within 10 seconds (the 8th time must end on RUN). If you’re successful, the vehicle will be in programming mode. The door locks will lock and unlock to signal this. 
  3. Press any button on the Ford remote to be programmed within 8 seconds. The door locks will cycle again to confirm the keyless entry remote is programmed and ready to use. 
  4. If you need to program additional key fobs, press any button on the remote within 8 seconds to cycle the door locks. 
  5. Turn the ignition to OFF. The doors will lock and unlock again to verify that the programming process is complete. 

How to Turn Off Ford MyKey

If your vehicle is equipped with the Ford MyKey feature, there may be times when you want to deactivate it for your Baton Rouge drives. To turn off Ford MyKey, you need to start the vehicle with your main admin key or admin key fob. Then, follow the instructions below: 

 

  • Start your vehicle and allow the computer and screen to turn on.
  • Use your steering wheel-mounted controls to press the left arrow button and access the main menu.
  • Press “Settings” after selecting “OK.”
  • When you reach the “Settings” screen, scroll until you find the “MyKey” option. Press “OK.”
  • Under “MyKey,” select “Clear MyKey.”
  • After selecting “Clear MyKey,” press and hold “OK” until you get the “All MyKeys Cleared” message on the screen.

Contact Sterling Automotive Group for More Information 

Now that you know how to program a Ford key fob, you’re ready to use the keyless entry feature on your vehicle in Alexandria. If you are having trouble with Ford key fob programming, do not hesitate to reach out to us with any questions. We can help troubleshoot the issue. Visit our service center today for assistance. 

 

If you need a new key fob for your vehicle, be sure to stop by our parts center

Saved Vehicles

You don't have any saved vehicles!

Look for this Save icon

Once you've saved some vehicles, you can view them here at any time.

Sterling Automotive Group 30.514486389457254, -92.06766707595126.